Different types of wood cutting of portable table saws

Currently, the table saw has become the most common tool used in carpentry workshops. Because of outstanding features such as easy cutting wood, no effort, and manpower. And it has increasingly replaced for manual saws like hand saws, circular saws, …

However, it has been observed that many people when buying saws do not know all about its superior mechanism or technique such as being able to cut multiple corners as required, desired by users. Therefore, in this article, I will give some typical technical tips about professional wood cutting types to support you to learn and gain more benefits in the use of the best portable table saw

  • Typical cutting styles

Currently, there are various types of cutting such as dado cuts, bevel cuts, rips cuts, miter cuts, … All of them make the worker’s work easier and faster. Let’s start to understand what types of ideas are.

Rip cuts

A rip cut is the simplest and most common type of table saw. Users formed in parallel with the grain and can divide the log in a straight line. If you are a beginner in learning how to use a table saw, I think you should practice using portable saws like a circular saw. Practice how to cut straight logs. Because when you get used to the pressure of hand-sawing, you’ll use table saws more easily.

To cut a log straight by a portable table saw, adjust the blade carefully on the surface of the wood to be cut. Be sure to use it correctly so that there is no problem of kicking back when operating. Next, you need to adjust the width of the fence and loosen or tighten the rail so you can move the log to the right to left to adjust the accuracy of the cutting position when sawing.

During the cutting process, you have to hold the wood tightly and use the stick to push the wood to protect your hand and possibly more precisely.

Beveled cut

Before you create a bevel, Find out about the system on the saw table. Some machines are tilting to the right, the others tilt to the left. Therefore, when making you must pay attention to the tilt of the saw to manipulate the most accurately. For example, the table is tilted to the left 40 degrees, you should place the saw on the right-hand side to cut the oblique angle most excellently. Just like the straight cut, you need to keep and place the saw according to your angle so you can cut the most perfect log. This type of cutting you need to be patient to create the desired bevels.


The cross-cut is a combination of straight cutting and horizontal cutting. Straight-cut work is extremely simple for most people, but with cross-cutting, not everyone can do. 

 You initial reach the saw a little distance from the wooden board. Then use a ruler to mark the horizontal line on the wooden board (use a 90-degree protractor to get the best cut). After that, you have to make sure your hand has enough strength to keep the fence cut to have the perfect cut.

Dado cuts

Dado cut is a type of specialized cutting for furniture manufacture that allows workers to create a joint to connect two or more pieces of wood. You need to use a dedicated blade. Therefore, it is wise to choose a table saw with a saw blade to cut this type.

Miter cuts

The last type of cut I want to show you is the miter cut. You can cut multiple materials with different angles from 45 degrees to 90 degrees, … to create a joint that is mounted at a 90-degree angle. For example, you cut two logs with 45 degrees. Then you link, join the two logs together to create a 90-degree angle. You can see this cut on the edges of the door or furniture. Miter cuts are also used to create boxes, creating frame structures. You also need to add tools to measure the angle to achieve the most accurate cut

In conclusion

I have introduced some of the most popular cutting styles available today. Therefore, depending on the workmanship or the stage you have to perform, Let’s study and learn the above cut styles to improve your cutting skills right away.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: